Audio Settings - Pioneer DEH-X6800BT Mode D'emploi

Menu Item
STOP
OPERATE MODE
[CHANNEL], [REPLAY]
SiriusXM settings
SiriusXM is only available for DEH-X3800S
Menu Item
PAUSE
TUNEMIX
[ON], [OFF]
TUNE SCAN
TUNE START
[ON], [OFF]
16
En
Description
Stop playback.
Assign or buttons to select a channel
or skip backward/skip forward.
Description
Pause or resume playback.
Create a music channel that's a blend of songs
made up from the music channels stored on the
current band of presets.
Scan through songs from your music channel
presets.
Start playback of the broadcast from the
beginning of a song when tuning to a preset
music channel.
Menu Item
PARENTAL CTRL
[LOCKED CH], [CLEAR ALL], [EDIT
CODE]

AUDIO settings

Menu Item
FADER*1
BALANCE
EQ SETTING
[SUPER BASS], [POWERFUL],
[NATURAL], [VOCAL], [CUSTOM1],
[CUSTOM2], [FLAT]
Select an equalizer band and
level for further customizing.
Equalizer band: [80HZ], [250HZ],
[800HZ], [2.5KHZ], [8KHZ]
Equalizer level: [+6] to [–6]
Description
Input the current passcode on the [PASSCODE]
screen (the default passcode is 0000).
1 Turn the M.C. dial to select a number.
2 Press the M.C. dial to move the cursor to the
next position.
3 After inputting the passcode, press the M.C.
dial.
4 Turn the M.C. dial to select one of the
following menu items, then press to confirm.
• [LOCKED CH]: Lock the current channel, which
contains mature content.
1 Press the M.C. dial to turn the lock on or off.
• [CLEAR ALL]: Unlock all the channels that have
restricted access.
1 Turn the M.C. dial to switch to [YES], then
press to confirm.
• [EDIT CODE]: Change the passcode.
1 Repeat steps 1 to 3 to enter a new passcode.
2 After inputting the passcode, press the M.C.
dial.
The new passcode is saved.
Description
Adjust the front and rear speaker balance.
Adjust the left and right speaker balance.
Select or customize the equalizer curve.
[CUSTOM1] can be set separately for each source.
However, each of the below combinations are set
to the same setting automatically.
• USB, iPod, PANDORA (iPhone), ANDROID, and
APP (iPhone)
• BT AUDIO, PANDORA (Android), ANDROID, and
APP (Android)
[CUSTOM2] is a shared setting used for all
sources.