Car Remote Mode - Pioneer DEH-X6800BT Mode D'emploi

Channel search: Press the M.C. dial to stop a scan.
NOTE
Press DISP to change the display information between "Channel Name", "Artist Name", "Song Title",
"Content Info" and "Channel Number".
Scan options
Purpose
Stopping a scan (selecting the channel or
song playing)
Switching to the next/previous song during
TuneScan
Switching to the next/previous channel
during the category scan
Aborting a scan (The last channel or song
will continue to play when scan ends.)
To preset a channel
1
While receiving a channel you want to store, press and hold one of the number
buttons (1/ to 6/ ) until it stops flashing.
To play the stored channels, select the band and then press a number button (1/
6/ ).
Parental Control
Some SiriusXM channels contain mature content. You can lock these channels. For
details, see [PARENTAL CTRL] in SiriusXM settings (page 16).

Car Remote Mode

You can operate the unit from a car remote application installed on an iPhone/Android
device. In some cases, you can control aspects of the application, such as source
selection, pause, etc., by using the unit.
For details on what operations are available on the application, see the application's help
section.
WARNING
Do not attempt to operate the application while driving. Make sure to pull off the road and park your
vehicle in a safe location before attempting to use the controls on the application.
14
En
Operation
Press the M.C. dial.
Press or .
Press or .
Press BAND/ .
For iPhone users
This function is compatible with iPhones and iPod touches installed with iOS 8.0 or later.
For Android device users
This function is compatible with devices that have Android OS 4.1 or later installed and
also support Bluetooth SPP (Serial Port Profile) and AOA (Android Open Accessory) 2.0.
Making the car remote connection
The Bluetooth connection is available for all units except DEH-X3800S.
1
Connect this unit with the mobile device.
• iPhone/Android device via USB (page 7)
• Android device via Bluetooth (page 8)
2
Press the M.C. dial to display the main menu.
3
Turn the M.C. dial to select [SYSTEM], then press to confirm.
4
Turn the M.C. dial to select [APP CONN.SET], then press to confirm.
5
Turn the M.C. dial to select one of the below.
• Select [WIRED] for a device connected via USB.
• Select [BLUETOOTH] for an Android device connected via Bluetooth.
Proceed to step 9 if you select the USB connection for iPhone or the Bluetooth
to
connection.
6
Press BAND/ to display the previous menu list.
7
Turn the M.C. dial to select [ANDROID WIRED], then press to confirm.
8
Turn the M.C. dial to select [APP CONTROL] for an Android device connected via
USB.
If [ON] is selected in [P.APP AUTO ON] (page 17), the car remote application on the
Android device starts automatically, and all the steps are finished.
NOTE
If the car remote application has not been installed on your Android device yet, a message that
prompts you to install the application will appear on your Android device. Select [OFF] in [P.APP
AUTO ON] to clear the message (page 17).
9
Press SRC/OFF to select any source.
10
Press and hold the M.C. dial.
The car remote application on the mobile device starts.