Operation - ADE Fred TE 1700 Mode D'emploi

Notes on changing the battery:
‚ The batteries need to be changed when
‚ Only use the type of battery that is
‚ Always exchange all of the batteries at the
‚ Dispose of batteries in an environmentally

Operation

Weighing
1. Place the scales on an even, firm, and dry surface.
Carefully position the scales in order to avoid hard
impacts to the sensors/feet and therefore to avoid
damage.
2. Remove the protective cover from the scales.
3. Switch on the scales by pressing the
moment until "0" appears on the display.
4. Use the UNIT button to select the desired unit of
measure. Your options are:
g = Gram
ct = Carat
gn = Grain
oz = Ounce
ozt = Troy ounce
dwt = Pennyweight
"Lo" or nothing is shown on the display.
specified in the "Technical Data".
same time.
appropriate way (see "Disposal").
button. Wait a
27