Power Take-Off; Power Take-Off (Pto); Implement Hitch End Fitting - GOLDONI TWIST 5 Notice D'utilisation Et D'entretien

GOLDONI S.p.A.

POWER TAKE-OFF

Power take-off (PTO)

WARNING
when the PTO is not used, move the
mode selector lever to the Neutral or
Independent position (depending on
the model or version). This prevents
the shaft of the PTO and other spinning
components from accidentally turning.
WARNING
Do not remove
protective plate
WARNING
Whenever the PTO is not in use, the
drive shaft must be covered by the
special guard.
Power take-off
PTO shaft guard.
Implement hitching lever
The PTO is engaged by means of the
PTO lever and, when the machine is at a
EN Inglese
or damage the
standstill, with the Gear Stop raised.
The tractor is equipped with a rear power take-off
able to function in the following mode:
Independent.
20x17 DIN 5482 profile
Engine RPM
3.600
Turning direction: clockwise.
IMPORTANT
The two-wheeled tractor is equipped
with a safety device that prevents the
reverse gear from being engaged when
the PTO is engaged, in the normal
operating direction. Set the PTO to the
neutral position before engaging the
reverse gear.

Implement hitch end fitting

Type: Quick hitch
The coupling on the two-wheeled tractor makes
the implements much easier to hitch and unhitch.
Insert the sleeve of the implement
lock has completely engaged.
To unhitch the implement, raise the catch
push the two-wheeled tractor forwards.
95
PTO idling rate Ratio
923
until the
OPERATING INSTRUCTIONS
TWIST
3,9
and