Reverse Shuttle Lever; Differential Lock - GOLDONI TWIST 5 Notice D'utilisation Et D'entretien

GOLDONI S.p.A.

Reverse shuttle lever

The lever has two positions (plus neutral):
Forward Neutral Reverse
Selection is not synchronized.
Proceed as described to select the forward or
reverse speed:
Release the Gear Stop lever.
Stop the machine.
Select the forward or reverse speed.
Gradually depress the Gear Stop lever to
disengage the (safety) linkage in the
device.
EN Inglese
WARNING
When you need to use the PTO to a
standstill place the shift lever in neutral
and hold the reverser lever in front
position. The reverse lever in neutral
position detaches the PTO

Differential lock

DANGER
When the differential lock is engaged,
the tractor cannot be steered.
IMPORTANT
Do not use the differential lock near or
in bends and avoid using it in fast
gears or with engine running at a high
rate.
The tractor is equipped with a mechanical
differential lock on both axles.
Use recommended for ploughing work or if one of
the two driving wheels possesses insufficient grip
owing to muddy, rugged or slippery ground.
The diff lock is mechanically controlled by means
of the lever. It is unlocked by releasing the lever.
To get the most out of the device, engage
the differential lock before the wheels begin
to slip. Do not engage the lock while one
wheel is already slipping.
93
TWIST
OPERATING INSTRUCTIONS