Operation - GOLDONI TWIST 5 Notice D'utilisation Et D'entretien

GOLDONI S.p.A.
catching fire, periodically check the fuel
pipe and replace it if it appears to be
damaged to an extent that could impair
its tightness.
Refuel before starting the engine.
Never remove the plug of the fuel tank
or add fuel while the engine is running
or hot.
If fuel is spillt, do not attempt to start
the engine but move the machine away
from the place of spillage and avoid
creating any source of ignition until fuel
vapors have dissipated.
Securely tighten the plugs on the tank
and containers.
Replace faulty silencers.
Clean all foreign materials from the
machine (dirt, tools, objects in general)
that could impair the way it operates or
injure the operator.
EN Inglese

Operation

Do not operate the engine in a confined
space where dangerous monoxide
fumes can collect.
Operate only in daylight or in good
artificial light.
Before attempting to start the engine,
disengage all the PTOs, shift the gear
and reverse shuttle to the neutral
position and DO NOT press the Gear
Stop lever.
Take the greatest care when changing
direction or when pulling the machine
towards yourself.
Before beginning to use the machine,
check to make sure that the safety
systems function correctly. Do not
begin work
correctly.
It is absolutely forbidden to remove or
tamper
Modifications to the machine could
lead to safety problems. In such cases,
solely the user will be responsible for
any deriving accidents.
Whenever the handlebars are adjusted
or turned, make sure that the safety
components
functions.
If you must cross a steep slope,
consult section: Danger of tipping
over.
Remember there is no such thing as a safe
slope. Driving up and down grassy slopes
requires particular care to avoid overturning:
do not stop or start suddenly when
driving on slopes;
engage the clutch slowly. Always keep
the gear engaged, especially when
traveling downhill;
73
unless they
with the safety
fully perform
TWIST
function
devices.
their
SAFETY