Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
CARE AND CLEANING
IMPORTANT: Allow the appliance to cool completely before putting on or taking off
parts, and before cleaning the appliance.
NOTE: Disassemble the unit properly before cleaning. For instructions, refer to the
SET UP & ASSEMBLY section steps 7, 8, and optional.
1
The following parts are dishwasher-
safe, top rack only:
Fine and Coarse Blades
Ice Cup Pusher, Ice Cup Sleeve and
TIPS FOR GREAT RESULTS
Setting Up Your Shave Ice Attachment
• It is recommended that you install
your Shave Ice Attachment on the Stand
Mixer first, before completing any other
set up step.
• To more easily install the clear plastic
Ice Cup into the Upper Housing, look
for the small black indicator arrow. This
arrow must line up with the Lock/Unlock
icons on the Upper Housing.
• When switching blades, please note
that the blades feature 3 uniquely
sized tabs that must line up with their
corresponding slots in the bottom of
the ice cup. If the tabs are lined up
incorrectly, the blade will not install.
10
W11499125B.indb 10
W11499125B.indb 10
,
Detachable Ice Cup
,
,
Plastic Ice Molds
.
Lids
2
Do not immerse Housing in water or
other liquid. Wipe clean with a warm,
damp cloth, and dry thoroughly with a
soft cloth before re-use or storing.
Making Shave Ice
• Tempering is an important part of
making great Shave Ice since an ice puck
straight out of the freezer is actually
TOO COLD to shave. Tempering means
allowing your ice puck(s) to warm slightly
at room temperature, until the outside
of the puck has a nice glossy sheen to it.
This typically takes about 10 minutes.
Ice pucks made with plain water
NOTE:
require tempering. For mixed base
recipes, refer to the recipe details for
tempering instructions.
• Some Shave Ice recipes, particularly
those with ingredients frozen into the ice
puck, may shave better with either the
Fine or Coarse blade. It is recommended
that you try out recipes with each blade
to see which produces your desired
result.
09-03-2022 18:02:38
09-03-2022 18:02:38
Publicité
Table des Matières
