Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
PRODUCT USAGE
ASSEMBLY
1
Grip the blade from the bottom and slowly
insert it into the bottom of the Ice Cup
by aligning the interlocking tabs. Once
inserted, rotate the blade to the left until
you hear a "Click", to properly lock the
blade in place.
NOTE: Each of the interlocking tabs is
unique size, ensuring the blade can only be
installed in the correct position.
3
Attach the Detachable Ice Cup to the
bottom side of the main housing, rotating
it to the left to lock it in place.
NOTE: The small indicator arrow on the
Detachable Ice Cup that should line up
with the Lock and Unlock symbols on the
main housing.
W11499125B.indb 7
W11499125B.indb 7
2
Insert the Ice Cup Sleeve into the
Detachable Ice Cup, then insert a
prepared Ice Puck. Be sure to insert the
ice puck with the cross hatches facing
upward.
4
Release the top lever by gently rotating it
to the right. The spring will engage as the
Ice Pusher clamps down on the ice puck.
The Shave Ice Attachment is properly
loaded and ready to use.
7
09-03-2022 18:02:37
09-03-2022 18:02:37
Publicité
Table des Matières
