Unpacking The Siren; Overview Of Model Sst3-Mv Siren - Federal Signal SST3-MV Mode D'emploi

Installation and Maintenance Instructions
• Provide a copy of these instructions to the Safety Engineer,
operator(s), and maintenance personnel.
• File these instructions in a safe place and refer to them when
maintaining and/or reinstalling the device.
Failure to follow all safety precautions and instructions may result
in property damage, serious injury, or death.

Unpacking the Siren

After unpacking the Model SST3-MV, examine it for damage that
may have occurred in transit. If the siren has been damaged, do not
attempt to install or operate it. File a claim immediately with the
carrier, stating the extent of the damage.
Carefully check all envelopes, shipping labels, and tags before
removing or discarding them. If any parts are missing, please call
Federal Signal Customer Support at 708-534-4756 or 877-289-
3246. Disposal of all shipping materials must be carried out in
accordance with national and local codes and standards.

Overview of Model SST3-MV Siren

The Federal Signal Model SST3-MV is an electronic siren that
produces three different high-decibel tones. It features internal
amplification and the circuitry required to produce wail, yelp and
horn tones. Each tone is manually activated from a remote point.
The SST3-MV operates on 24 Vdc, 120 Vac, or 240 Vac. The
NEMA 3R (with backbox) housing is molded from impact-
resistant ASA (acrylic-styrene-acrylonitrile) plastic, making it
resistant to ultraviolet and ideal for indoor or outdoor use. The
omnidirectional swivel-mount system enables the output to be pointed
anywhere within a 360-degree half-sphere.
The Model SST3-MV can be used as a standalone, high-output
audible warning device in any application in which multiple tones are
needed, but voice paging is not required. Typical applications include
emergency warning, start and dismissal, fire alarm, general alarm, and
evacuation.
6
Model SST3-MV Siren