Safety Messages To Installers - Federal Signal SST3-MV Mode D'emploi

Safety Messages to Installers

It is important to follow all instructions shipped with this product.
This device is to be installed by a trained electrician who is
thoroughly familiar with the National Electric Code/Canadian
Electric Code and will follow the NEC/CEC Guidelines as well as
local codes.
The selection of mounting location for the device, its controls and
the routing of the wiring is to be accomplished under the direction
of the facilities engineer and the safety engineer. In addition, listed
below are some other important safety instructions and precautions
you should follow:
• Read and understand all instructions before installing or
operating this equipment.
• Do not connect this unit to the system when power is on.
• Optimum sound distribution will be severely reduced if any
objects are in front of the speaker. You should ensure that the
front of the speaker is clear of any obstructions.
• All effective warning speakers produce loud sounds which
may cause, in certain situations, permanent hearing loss. You
should take appropriate precautions such as wearing hearing
protection.
• All effective warning speakers produce loud sounds, which
may cause, in certain situations, permanent hearing loss. The
device should be installed far enough away from potential
listeners to limit their exposure while still maintaining its
effectiveness. The OSHA Code of Federal Regulations 1910.95
Noise Standard provides guidelines which may be used
regarding permissible noise exposure levels.
• Establish a procedure to routinely check the sound system for
proper activation and operation.
Installation and Maintenance Instructions
Model SST3-MV Siren
5