Publicité
Les langues disponibles
Les langues disponibles
Installation Steps
Remove liner from dual lock strips.
3
Care and Cleaning
• Wash only with mild soap & dry with a clean cloth.
Warranty
Unconditional Lifetime Warranty: Auto Ventshade Headlight Covers are warranted to be free of manufacturer's
defects. Neither seller or manufacturer shall be liable for any injury, loss or damage, direct or consequential,
arising out of use of this product. User assumes all risk liability whatsoever in connection with this product.
Auto Ventshade requires the retention of these instructions for as long as you own avs headlight covers. Auto
Ventshade also requires that you transfer instructions to any subsequent owner of the vehicle that uses these
covers. Failure to transfer these instructions may void all warranties associated with the headlight covers.
Congratulations!
You have purchased one of the many quality Auto Ventshade™ branded products offered by Lund International,
Inc. We take the utmost pride in our products and want you to enjoy years of satisfaction from your investment.
We have made every effort to ensure that your product is top quality in terms of fit, durability, finish and ease of
installation.
™
Auto Ventshade
NOTE: Actual application may vary slightly from illustrations.
Repeat steps 1-4 for the passenger side.
TO REMOVE HEADLIGHT COVER
Use finger to pull out edge of cover to release Dual-Lock.
Lund International, Ventshade Accessories Division
655 Raco Drive, Lawrenceville, GA 30045
800-241-7219 • Fax 770-339-5839 • Visit us at lundinternational.com
© 2005 Lund International, Inc. All rights reserved.
, the Auto Ventshade
logo and the AVS
TM
TM
Adhere dual locks to previously cleaned headlight
trim. Press on the front of cover to ensure headlight
cover is securely in place.
secure dual lock
strips
headlight
cover
4
logo are trademarks of Lund International, Inc.
TM
Page 2 of 2
headlight
assembly
Publicité
