Publicité
3.2 Installation instructions
General
Install the compressor in an area where noise levels pose no problem and where there is the correct
ventilation for its cooling.
Before connecting the compressor, check that the electrical data shown on the
rating plate conform to the local electrical mains. Before establishing the electrical
connection, make sure that the power is switched off and correctly isolated.
Connecting the compressor to the mains must be done by a qualified electrician ac-
cording to the wiring diagram provided with the system. The complete wiring must
conform to the applicable regulations. Connecting the compressor to the mains
must be done by a qualified electrician according to the wiring diagram provided
with the system.
The complete wiring must conform to the applicable regulations.
instruction manual
71
71
Publicité
