Publicité
instruction manual
1. Undo the oil filler plug FC (Fig. 10).
2. Fill with oil through a funnel until the level of the lubricant in the sight glass SG, is at the halfway mark
of the red circle on the oil level sight glass SG (Fig. 9).
3. Re-tighten the oil filler plug FC.
9.6 Oil change (for lubricated models)
Prima di effettuare gli interventi di riparazione o manutenzione, arrestare il com-
pressore e rilasciare la pressione. Disinserire la tensione ed isolare il compressore
dalla rete elettrica. Attendere 30 minuti.
To change the oil, keep to the specified steps:
1. Undo the oil filler plug FC (Fig. 11)
2. Place a low container under the oil draining plug DP.
3. Undo the oil drain plug DP (Fig. 12), using a hex wrench.
4. Once the draining has been concluded, re-tighten the oil draining plug DP.
5. See to the oil refilling as per paragraph 9.5 OIL FILLING (for lubricated models)
6. Re-tighten the oil filler plug FC.
FC
98
FC
11
10
DP
12
Publicité
