Soldering Sponge; Soldering - Parkside PLSD 48 A1 Traduction Des Instructions D'origine

All manuals and user guides at all-guides.com

Soldering sponge

CAUTION!
► The hot soldering tip
dry soldering sponge
can be damaged .
NOTE
► The soldering sponge
► Dampen the soldering sponge

Soldering

Vapours can lead to headaches and fatigue if inhaled .
■ The soldering iron has a rated power output of 48 watts and is
ideal for electronic solders .
■ Its design makes it especially suitable for difficult-to-access and
fine soldering work .
♦ Clean the soldering tip
♦ After cleaning, the soldering tip
soldering tip
♦ Guide the soldering tip
♦ Place the solder
to melt it .
♦ Keep adding in solder
♦ Then withdraw the soldering tip
overheating the molten solder .
♦ Allow the solder to harden and avoid vibrations .
PLSD 48 A1
must never come into contact with a
. Otherwise, the soldering sponge
is used to clean the soldering tip
on the moist soldering sponge
by melting the solder
to the solder joint and heat it .
between the solder joint and soldering tip
until the entire solder joint is covered .
before use .
must be tinned . Tin the hot
.
immediately to prevent
GB │ IE
.
.
│ 29 ■