Maintenance And Cleaning - Parkside PLSD 48 A1 Traduction Des Instructions D'origine

All manuals and user guides at all-guides.com
NOTE
► The flux is either included in the solder or applied separately .
When buying the solder, ask about its use and the appropriate
flux .

Maintenance and cleaning

WARNING! RISK OF INJURY! Always pull the
plug out of the socket and let the appliance
cool down before you carry out any work
on the appliance .
■ Always clean the appliance after completion of work .
■ To clean the housing, use a cloth and a mild detergent if necessary .
■ Never use sharp objects, petrol, solvents or cleaning agents that
can damage plastic .
■ Do not allow any liquids to get into the interior of the appliance .
NOTE
► You can order spare parts (such as solder tips) via our service
hotline .
■ 30 │ GB │ IE
PLSD 48 A1