Switching Off; Soldering Sponge - Parkside PLS 48 C1 Traduction Des Instructions D'origine

Level 3 = 300°C normal operation, e.g. when using lead-free solder
Level 4 = 400°C high soldering temperature, e.g. for de-soldering
small solder joints
Level 5 = 500°C maximum soldering temperature, e.g. for
de-soldering larger solder joints
Switching off:
NOTE
► After use, always replace the soldering iron
spring .
♦ Move the ON/OFF switch
the plug from the socket when not in use.

Soldering sponge

CAUTION!
► The hot soldering tip
dry soldering sponge
can be damaged.
NOTE
► The soldering sponge is used to clean the soldering tip.
► Dampen the soldering sponge before use.
│
■ 42 GB
All manuals and user guides at all-guides.com
to position "0". Always remove
must never come into contact with a
. Otherwise, the soldering sponge
in the coil
PLS 48 C1