Turning Off The Power - Panasonic PT-LB10NTU Mode D'emploi

Turning off the power

%
Press the POWER button.
#
B"POWER OFF" is displayed on the
screen.
Press the I I or H H button to select "OK", and
$
then press the ENTER button.
BThe lamp unit will switch off and the picture will stop being projected.
(The power indicator on the projector will illuminate orange while the
cooling fan is still operating.)
%
Disconnect the power cord after the power
indicator on the projector illuminates red.
NOTE:
B You can also turn off the power by pressing the POWER button twice or
by holding it down for at least 0.5 seconds.
B When the projector is in standby mode (the power indicator on the
projector is illuminated red), the projector continues to draw approximately
6 W of power even when the cooling fan has stopped.
26-E
NGLISH
Power indicator
Power
cord
#
$
P O W E R O F F
O K
POWER
INPUT
VIDEO RGB
AUTO
MENU
SETUP
ENTER
FREEZE SHUTTER
STD
VOLUME D.ZOOM
INDEX
WINDOW
PROJECTOR
C A N C E L