Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
CONTRAST
This adjusts the contrast of the
picture. (Adjust the "BRIGHT"
setting first if required before
adjusting the "CONTRAST" setting.)
The picture is bright: I button
The picture is dark:
BRIGHT
This adjusts the darker areas (black
areas) in the picture.
Black areas are too light: I button
Dark areas are too solid: H button
COLOR
(S-VIDEO/VIDEO/YP
The color is too deep: I button
The color is too pale: H button
TINT
(NTSC/NTSC 4.43/YP
This adjusts the flesh tones in the
picture.
The flesh tones are greenish:
I button
The flesh tones are reddish:
H button
SHARPNESS
To soften the picture details:
I button
To sharpen the picture details:
H button
COLOR TEMP.
C O L O R T E M P .
This is used to adjust the white
areas of the picture if they appear
bluish or reddish.
38-E
NGLISH
H button
P
only)
B
R
P
only)
B
R
S T A N D A R D
[
H I G H
[
L O W
White balance R/G/B
(W-BAL R/G/B)
(RGB only)
This is used to adjust the white
areas of the picture if they appear
colourised.
To make the selected color lighter:
I button
To make the selected color stronger:
H button
AI
ON
The lamp is controlled according to
the input signals to project images
with the best quality.
OFF
"AI" is disabled.
NOTE:
B "AI" is disabled when "LAMP
POWER" is set to "LOW".
(Refer to page 45.)
Publicité
Table des Matières
