Type 2000, 2002, 2012
2030, 2031, 2032, 2033
Option: Min. /max. stroke limitation
8.2.2.
Installation and commissioning
→
⑧ onto valve spindle and secure with Loctite
Screw coupling
274.
→
① in coupling ⑧.
Hook spindle
→
①.
Grease spindle
→
⑨ and insert into guide spindle ②.
Grease o-ring
→
② into actuator cover.
Insert guide spindle
→
Insert disk into the actuator cover, attach to the guide spindle
with the nut ⑩ and secure with Loctite 274.
→
To do this, use the width flat on the guide spindle
• Max. tightening torquet: 20 Nm
→
Screw actuator cover onto valve
• Max. tightening torque:
→
③ onto guide spindle ②.
Screw lower nut
→
④ on spindle ① and fix with cap screw ⑤ (Allan
Position bridge
key WAF5 or WAF8). Secure cap screw ⑤ with Loctite 274.
→
③ onto guide spindle ②.
Screw upper nut
→
Set max. and min. stroke by means of upper and lower nuts
→
Test valve for function and leaktightness.
→
⑥ with cover ⑦ by hand.
Screw on tube
All manuals and user guides at all-guides.com
②
② (WAF24).
G-100 = 45 Nm
H-125 = 60 Nm.
③.
8.3.
actuators K-175, l-225
Actuator
Spindle cap
Fig. 8:
Actuators K-175, L-225
min. / max. stroke limitation with optical position display
english
Parts required
1 Spindle extension
2 Guide spindle
3 Nut M40 x 2
4 Bridge
5 Cap screw
M16 x 45
6 Tube
7 Cover
8 Stop
(for Type 2012 SFA only)
19