GoPro HERO3+ BLACK EDITION Mode D'emploi page 50

wI-fI + wI-fI Remote
UsInG YOUr HerO3+ WITH THe WI-FI reMOTe
Once you have paired your camera with the Wi-Fi Remote, follow these steps
the next time you want to use the remote to control your camera. You only need
to pair the camera and remote once.
On the camera:
1. First, ensure both camera and remote are powered OFF.
2. Press the Power/Mode Button
3. Press the Wi-Fi On/Off Button
4. Press the Wi-Fi On/Off Button
5. Press the shutter/select Button
6. Use the Power/Mode Button
shutter/select Button
7. Press the shutter/select Button
8. You will see
On the remote:
1. Press the Power/Mode Button
2. You will see
3.
The remote's LCD screen will mirror the camera's LCD screen.
You can now use the remote to control your camera.
50
HERO3_Plus_Black_UM_ENG_FRA_REVA.indb 50
to select it.
.
on the remote's screen.
will appear once camera and remote are connected.
to power On your HERO3+.
to turn On the Wi-Fi.
again to access the Wi-Fi menu
to enter the Wi-Fi menu
to cycle to Wi-Fi rC, then press the
to select CUrrenT.
to power On the remote.
.
.
6/26/13 3:04 PM