GoPro HERO3+ BLACK EDITION Mode D'emploi page 43

One BUTTOn MODe (continued)
To exit One Button mode:
Note: one Button mode is disabled when connected to Wi-Fi Remote or GoPro App.
HERO3_Plus_Black_UM_ENG_FRA_REVA.indb 43
1. Power camera On.
2. Press and hold the shutter/select Button
in the LCD window.
3. Press the shutter/select Button
4. Use the Power/Mode Button
5. Press the shutter/select Button
6. To exit, hold down the shutter/select Button
through to and press the shutter/select Button
To stop the capture process (VIDeO or TIMe laPse)
PrO when in One BUTTOn, press and hold the shutter/select
TIP: Button for two seconds. You will return to the One
BUTTOn menu where you can turn One BUTTOn mode OFF.
until shows
to enter.
to highlight OFF.
to select it.
for two seconds or cycle
.
set uP
43
6/26/13 3:04 PM