GoPro HERO3+ BLACK EDITION Mode D'emploi page 46

set uP
Set the HERO3+ clock to ensure Video and Photo files are saved with the
correct date and time.
To change Month/Day/Year/Time:
1. Verify the camera is in settings mode. If the settings icon
LCD screen is not showing, press the Power/Mode Button
it appears.
2. Press the shutter/select Button
3. Use the Power/Mode Button
the set Up menu
4. Press the shutter/select Button
5. Use the Power/Mode Button
6. Press the shutter/select Button
Month (MM) will be highlighted.
7. Press the shutter/select Button
8. Use the Power/Mode Button
is highlighted.
9. Press the shutter/select Button
10. To advance to the next option, press the shutter/select Button
11. Repeat steps 7, 8 and 9 to make selections for day (DD), year (YY),
hour (HH) and minutes (MM).
12. To exit, hold down the shutter/select Button
through to
Note: If the battery is removed from the camera for an extended period of time
Month/Day/Year/time will need to be set again.
46
HERO3_Plus_Black_UM_ENG_FRA_REVA.indb 46
MONTH / DAY / YEAR / TIME
to enter the settings menu
to cycle through settings to locate
.
to enter the set Up menu.
to locate the Month/Day/Year/Time menu
to enter Month/Day/Year/Time menu;
to access the list of months (1 to 12).
to cycle through list until desired selection
to select it.
and press the shutter/select Button
on your camera's
repeatedly until
.
.
.
for two seconds or cycle
.
6/26/13 3:04 PM