GoPro HERO3+ BLACK EDITION Mode D'emploi page 42

set uP
With One Button mode selected, the camera automatically begins recording
when powering the camera On. One Button mode can be configured to start
in Video or Time lapse.
OFF
ON
To turn One Button mode On:
1. Verify the camera is in settings mode. If the settings icon
camera's LCD screen is not showing, press Power/Mode Button
repeatedly until it appears.
2. Press the shutter/select Button
3. Use the Power/Mode Button
the set Up menu
4. Press the shutter/select Button
5. Use the Power/Mode Button
One Button mode
6. Press the shutter/select Button
7. Use the Power/Mode Button
8. Press the shutter/select Button
9. To exit, hold down the shutter/select Button
through to
The next time you power your camera On, it will begin recording in its Default
Power Up Mode. To stop recording, push and hold
42
HERO3_Plus_Black_UM_ENG_FRA_REVA.indb 42
ONE BUTTON
(Default)
.
.
and press the shutter/select Button
on your
to enter the settings menu
to cycle through settings to locate
to enter set Up.
to cycle through to locate
to enter One Button menu.
to cycle through options.
to select a highlighted option.
for two seconds or cycle
to select it.
for two seconds.
.
6/26/13 3:04 PM