arjo Enterprise 5000X E5X Notice D'utilisation page 35

Bio-Contour
Backrest angle (Optional)
Thigh section (Optional)
Mattress Platform Height (Optional)
The Bio-Contour up button simultaneously raises the backrest and thigh
sections to provide upright patient profiling; the raised thigh section
prevents the patient sliding down the bed.
The Bio-Contour down button returns the mattress platform to a flat
position.
These buttons raise and lower the backrest.
The backrest will pause when it reaches an angle approximately 30
above the horizontal.
These buttons raise and lower the thigh section.
When the thigh section is first raised from the flat position, the calf
section will be in the Fowler position (angled downwards).
To change the calf section to the vascular (horizontal) position, refer to
the section Adjusting the calf position.
These buttons raise and lower the mattress platform.
When the mattress platform is lowered to 38cm* above the floor, it will
pause then continue to lower until it reaches its minimum height.
* 40cm on beds with 150mm castors.
35