Enlarging The Picture (Zoom); Adjusting The Picture Quality (Vfp) - JVC EX-D5 Manuel D'instructions

Enlarging the picture
(ZOOM)
(only for moving image)
1
Press ZOOM during playback or
while paused.
• Each time you press the button, the picture
magnification will be changed.
• (For a JPEG) You cannot change the
picture magnification during slide-show
playback.
2
Select the portion you want to
see by using cursor
• To resume normal playback, select
"ZOOM OFF" in Step
Adjusting the picture
quality (VFP)
1
Press VFP during playback or
while paused.
The current setting will be displayed on the
TV screen.
• GAMMA: Adjust this if the neutral color is
bright or dark. The brightness of dark and
bright portion is maintained.
• BRIGHTNESS: Adjust this if the picture is
bright or dark on the whole.
• CONTRAST: Adjust this if the far and near
position is unnatural.
• SATURATION: Adjust this if the picture is
whitish or blackish.
• TINT: Adjust this if the appearance of flesh
tone is unnatural.
• SHARPNESS: Adjust this if the picture is
indistinct.
5/∞/2/3
.
1
.
2 2/3
Press cursor
mode.
• It is recommended to select "NORMAL"
usually, or "CINEMA" in a dark room. When
either "NORMAL" or "CINEMA" is selected,
7
go to Step .
• When either "USER 1" or "USER 2" is
selected, the adjustment can be carried out
in detail in the operations after Step
5/∞
3
Press cursor
item to be adjusted.
4
Press ENTER.
Ex.:
GAMMA
5/∞
5
Press cursor
value.
6
Press ENTER.
To adjust other items, go back to Step
7
Press VFP to go off the window.
NOTE
• If no operation is made for several seconds during
the procedure, the settings made so far will be
automatically stored.
• "VFP" is an abbreviation of "Video Fine Processor".
Advanced operations
to select VFP
3
.
to select an
TV screen
to change the
3
.
25