hager HZI810 Mode D'emploi page 27

oPeratIon
Programming
>
Menu Timer
1 2
LCD Dénomination Description
Main Failure Delays priority network failure detection
timer
1 2
Delay on Standby network stability validation before transfer
transfer timer
1 2
O Main failure Rest in O position when transferring
timer from main network to secondary network
1 2
Main return Main network stability validation before re-transfer
timer
1 2
O main return Rest in O position when re-transferring from standby
timer network to main network
1 2
Cool down Allows generator cooling down period after load's
timer
retransfer from standby source (generator) to Main source
1 2
52
All manuals and user guides at all-guides.com
oPeratIon
Plage Valeurs
de par
réglage
défaut
From 0 5 s
to 60 s
From 0 5 s
to 60 s
From 0 0 s
to 20 s
From 0 2 min
to 30 min
From 0 0 s
to 20 s
From 0 4 min
to 10 min
Programming
>
Inputs / Outputs Menu
1 2
Output relays are NO type (construction) and can not be
configured as NC.
Input state can be configured: NC or NO.
LCD Denomination / Definition
Input 1
1 2
Input 1 state
1 2
Input 2
1 2
Input 2 state
1 2
output 1
1 2
output 2
1 2
53
Setting range Default
values
Ft1, Ft2, Ft3, Ft4, /
Pri, Mtf, / S2A,
MAN, CtS, tol,
tfl, EJP
NO, NC, / No
Ft1, Ft2, Ft3, Ft4, /
Pri, Mtf, / S2A,
MAN, CtS, tol,
tfl, EJP
NO, NC, / No
S1A, S2A, LS, / /
S1A, S2A, LS, / /