Annexes; Network Analysis; Programming And Connections - hager HZI810 Mode D'emploi

annexeS

networks analysis
tYpes of networks
>
Three phases network with neutral - 4NBL
> Phase-Phase network without neutral - 2bl
>
Three phases network without neutral - 3NBL
66
All manuals and user guides at all-guides.com
>
Two phases network (with midpoint) - 2NBL
> single phase network with neutral (phase-neutral) - 1bl*
* to power supply the product, make a strap between 103 (N) and
104 terminals (power supply input 104 - 106 on source ).
>
Three phases network with neutral on source
single phase network with neutral on source
- 41 nbl
Only single phase loads.
annexeS

Programming and connections

the product integrates all identified networks in his
programm. It is necessary to verify this parameter before
use.
three phasessensing on source*
3 phases 1 phase
4 wires 3 wires
Prog.
4NBL 2NBL
source
(active connectors)
Câblage source
(active connectors)
sensing u12, u23, u12, u23,
source
parameters u31, u1, u31
available u2, u3
u31 u31
source
Controls u12, u23, u12, u23,
source
u31 u31
u31 u31
source
example u12 = u23 = u31 = 240 V
source
Un = 240 V u31 = 240 V
240 V 240 V
source
* to power supply the product, make a strap between 103 (N) and 104 terminals (input power supply 104-106 on source
67
- single phase sensing on source
2 phases 1 phase 3 phases
2 wires 2 wires 3 wires
2 BL 1BL* 3NBL
u31 u1 u12, u23, u1, u2, u3
u31
u31 u1 u31 u1
u31 u1 u12, u23, u1, u2, u3
u31
u31 u1 u31 u1
u31 = 240 V u1 = 240 V u12 = u23 = u1
u31 = 240 V u3
240 V 240 V 240 V 240 V
3 phases
41NBL
1
N
2
3
= u2 =
= 240 V
).