Maintenance; Personal Protective Equipment And Personnel Qualification; Maintenance Interval - Rohm CAPTIS-M Traduction Du Manuel D'utilisation Original

7 | Maintenance

7 Maintenance
7.1

Personal Protective Equipment and Personnel Qualification

When working on and with the collet chuck CAPTIS-M, personal protective
equipment must be worn. The owner is responsible for providing personal
protective equipment.
▪ Personal protective equipment must be in perfect condition when carry-
ing out work. Defective safety equipment is to be replaced immediately.
▪ Observe information on personal protective equipment posted in the
working area.
▪ During rotational operation of the collet chuck CAPTIS-M, no protect-
ive gloves are to be worn! Hand protection is only to be worn during
transport, assembly and maintenance and as long as the collet chuck
CAPTIS-M is at a standstill.
Wear protective gloves
Wear safety goggles
Wear safety shoes
Work on and with the collet chuck may only be carried out by qualified oper-
ating and specialist personnel (see Qualification of Operating and Spe-
cialist Personnel [} 59]).
7.2

Maintenance Interval

The regular maintenance work is described in the following:
Activity
Check the tightness of the screw
connections.
See Checking the Tightness of
Screw Connections [} 87].
Lubricate the collet chuck.
See Lubricating the collet chuck
[} 88].
Partial cleaning.
See Partial cleaning [} 89].
Whole cleaning.
See Complete cleaning [} 90].
86 / 240
Interval
Weekly.
Every 8 hours.
Every 8 hours.
Every 500 hours.
1242467 CAPTIS-M