Amplifier Connection - auna Fullmatic Mode D'emploi

Note: Make sure that the drive belt is not twisted or distorted. Avoid oil.
Oil splashes will make the belt slippery.

AMPLIFIER CONNECTION

Connect the RCA output to the AUX input or phono input of your amplifier
or stereo system:
• The red plug is plugged into the right channel input.
• The white plug is plugged into the left channel input.
Note: When using the phono connector, set the PH/ LINE OUT switch to
PH (Phono) mode when you have connected the turntable to the phono
connector, switch to LINE OUT mode when you have connected the
turntable to the AUX connector of the stereo.
Belt
Motor Pulley
EN
15