Technical Description - Drive Harmony 14200 Guide D'utilisation

10. Technical Description

SPECIFICATIONS:
Power Supply (Note: See rating
label on the product)
Fuse Rating
Dimension (L x W x H)
Weight
Classification
Environment
Model
Size of Mattress
Dimension (L x W x H)
Weight
Static mode
Maximum Weight
Capacity
Therapy mode
NOTE: 1. Consult Drive Medical for further technical documents.
2. The specification is also suitable for other areas operating with same
3. Mattress dimension and weight is measured without foam cushion
4. The manufacturer reserves the right to modify the specification
AC 110-120V 60Hz, 4.5A (for 120V system)
T5AL 250V(for 120V system)
34 x 16.3 x 23.5 (cm) or 13.4" x 6.4" x 9.3" (in)
5 kg or 11.02 lb
Class I, Type BF,
IP21 (for 230V System ), IP20 (for 120V System)
Applied Part: Air Mattress
Not suitable for use in the presence of a flammable
anesthetic mixture (No AP or APG protection)
Environmental Information
Operation: 10° C to 33° C (50° F to 91° F)
Temperature Storage: -15° C to 50° C (5° F to 122° F)
Shipping: -15° C to 70° C (5° F to 158° F)
Operation: 10% to 90% non-condensing
Humidity Storage: 10% to 90% non-condensing
Shipping:10 % to 90% non-condensing
Operating
2000 m (Maximum)
Altitude
8" Mattress
2" foam pocket is provided
36" mattress
78.7" x 35.4" x 8"
200 x 90 x 20.3 cm
16.5 lb / 7.5 kg
440 lb / 200 kg
400 lb / 180 kg
power supply.
without notice.
Pump
Mattress
42" mattress
78.7" x 42" x 8"
200 x 107 x 20.3 cm
18.8 lb /8.5 kg
700 lb / 320 kg
650 lb / 300 kg
17
48" mattress
78.7" x 48" x 8"
200 x 122 x 20.3 cm
21.0 lb / 9.5 kg
990 lb / 450 kg
920 lb / 420 kg