Operation; General Operation - Drive Harmony 14200 Guide D'utilisation

4. Operation

NOTE: Always read the operating instructions before use.

4.1 GENERAL OPERATION

Static
Statique
Alternate
Alterné
Pulsation
Pulsation
Seat Inflation
Gonflage Du Siège
4.2 CPR
Système De Remplacement De Matelas D'air Réelle À Basse Pression Trois Thérapies
AutoFirm
Low Pressure Fermeté
Pression Faible
Automatique
Power Failure
Perte D'alimentation
System Failure
Soutien Technique
1. Switch on the main power switch found
on the left side of the Control Unit while
facing the User. Press (
panel to turn on the power.
2. The system will automatically go into "Auto
Firm" mode for a few minutes of infl ation.
3. When the initial infl ation (Auto Firm pro-
cess) is completed, the system will auto-
matically enter into Static mode
4. Using the Comfort Weight Sett ing butt ons,
adjust according to the weight and height
of the patient, adjust the pressure sett ing
to the most suitable level without bott om-
ing out.
5. Using the Therapy Mode butt on choose the
desired therapeutic mode.
NOTE: Seat infl ate mode should be used for
ingress and egress at all times to prevent bot-
toming out.
When CPR needs to be performed, click on
the release butt on on Quick Connector and
quickly detach the connector from the system
to release air.
12
) on the control