Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Using power assisted pedalling
06
1.a - Quick start instructions for use
with instrument "A"
Turn the assisted pedalling system on,
-
by keeping the button "T1" pressed for
more than 2 seconds.
The display will show the starting page,
then it'll pass to the main page.
-
Select the assistance level.
-
The EPAC bicycle is ready for use.
-
To turn off the assisted pedalling system, keep
the button "T1" pressed for more than 2 sec-
onds.
1.b - Quick start instructions for use
with instrument "B"
Turn the assisted pedalling system on
-
by keeping the button (1) on the bat-
tery pack pressed for three seconds.
The four LEDs turn on in sequence and
the test page is shown on the tool dis-
play (2). The main page is displayed
right after.
-
Select the assistance level.
-
The EPAC bicycle is ready for use.
-
After a certain period of inactivity, the assisted
pedalling system enters "SLEEP" mode.
-
To reactivate it, it is necessary to keep the but-
ton (1) on the battery pack pressed for 3 sec-
onds.
EN_22
T1
-
After a certain period of inactivity (approx. one
hour), the assisted pedalling system enters
"SLEEP" mode.
-
To restart the system, it is necessary to press
button "T1" on the tool twice (at intervals of
one second).
1
sec.
-
To turn the assisted
pedalling
system
off, keep button (1)
on the battery pack
pressed for 3 seconds.
2 sec.
1
2
Ed. 1 - 03/2019
Publicité
Table des Matières
