1. INTRODUCTION TO USE
This paragraph summarizes the most important information necessary for a correct use of the power-assisted
pedalling system.
-
Make sure that the battery pack is fully charged (see paragraph "3" of this section).
When charging the battery, it may be re-
moved or left in its housing on the bicycle.
-
Make sure that the connector is correctly con-
nected to the battery.
The bicycle can be equipped with two types of pedal-assist
Check which model is installed on your bicycle and see the
-
To use the "A" instrument, follow the instruc-
tions in paragraph "1a" and Chapter "5".
Quick start instructions for use with instru-
-
ment "A"
• paragraph "1a"
Ed. 1 - 03/2019
Using power assisted pedalling
control instruments.
relevant instructions.
-
-
To use the "B" instrument, follow the instruc-
tions in paragraph "1b" and Chapter "6"..
Quick start instructions for use with instru-
ment "B"
• paragraph "1b"
06
EN_21