Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Toilets
6
INSTALLATION
6.1
Installing the toilet with through-the-floor connections
15
Mounting
Template
➤ Place the floor-mounting template in
the desired location . Keep at least 11"
(279 mm) between the centerline of the
template and any walls or interior fixtures .
➤ Punch through the center of the holes and
mounting-bracket corners in the template .
EN
16
➤ Remove the template from the floor .
➤ Drill all access and fastener holes as
indicated on the template, using the
center punches as guides .
I
8100, 8500, 8600, 8900 models
only: Do not drill mounting-bracket
corners .
➤ Repeat the steps under figure 15 and 16
using the wall switch template .
➤ For 8100 Series models, drill a 2 .75"
(70 mm) diameter hole .
➤ For the 8500, 8600, 8700, and
8900 Series models, drill a 1" (25
mm) diameter hole .
10
Publicité
Chapitres
Table des Matières
