auna Connect Vinyl Cube Mode D'emploi page 42

EN
42
Display
Power Management
Sleeeptimer
Buffer
Weather
Radio Setup
Local Radio
Playback Setup
Device
Color / Monochrome
Configure to go to standby mode automatically during
in the menu or/ and without Wifi signal. Choose
the power management timer (5/15/30mins) to set
the duration of the radio to switch standby mode
automatically when you are not controlling it. Choose
Turn off to ignore the power management function.
Turn off or set the sleep timer of
15/30/60/90/120/150/180 minutes. Once the time is
set, there will be a bed icon with remaining minutes
at the top right corner and the device will turn to
standby then .Press Sleep on the remote control for the
shortcut of this function.
Configure the buffer time of the music playback,2/4/8
seconds.
Activate/deactivate the weather forecast for
the standby display. Choose your preferred
temperature unit ( or ) and then proceed
entering your location. When activated, the
weather forecast is shown in turns with the
clock display on the standby screen (each 10
secs).
You can choose the mode and threshold of the
FM easily
There is a shortcut Local Radio under Internet
Radio so that you can easily go to the station
list of your location. You may Manual Setup
your location, or let the system Auto Detect
your current location. The system detects the
location according to the IP address of your
connected network. Press Local Station to enter
this local radio list directly.
Select the playback mode of media center-Off
(no repeat or shuffle), Repeat all, Repeat one,
or Shuffle.
Default device name for DLNA is "AirMusic".
You may rename it for DLNA setup on the PC
or mobile. QR code for downlode and install
"AirMusic" control App.