auna Connect Vinyl Cube Mode D'emploi page 41

Network
Date and Time
Alarm
Timer
Language
Dimmer
Check Network When Power On: Enable/disable
WiFi network. When you enable the WiFi network,
the system will automatically search the available AP.
Select required AP.
Setup the date and time
Set time format display as 12 Hour or 24 Hour
Set date format YYYY/MM/DD or DD/MM/YYYY or
MM/DD/YYYY
• There are three independent alarms-2 alarms of
absolute time setting (Alarm 1 and Alarm 2) and 1
alarm for relative time setting (Alarm NAP).Press
Alarm on the remote control to enter this menu
directly.
• Note that the alarm source is from the preset
Internet radio if Alarm Sound is set to be Internet
Radio. It can only set one same IR station for
Alarm 1 and Alarm 2. When the alarm is reached
the unit connects to the Internet if the set network
is available. Therefore there may be some delay
from the alarm to the radio play. If no network is
connection can be established within one minute,
the alarm will change to Melody automatically.
• When Alarm" NAP" is set, it alarms once in
5/10/20/30/60/90/120 minutes depending on
which one you have set.
• Choose Alarm Volume to configure the volume of
the alarms.
Countdown timer (max. 100min)
English / Deutsch / Espanol / Francais / Portugese /
Nederlands / Italiano / Pyccknn / Svenska / Norske /
Dansk / Magyar / Cesky / Slovensky / Polski / Turkce /
Suomi
Power Saving / Turn On
EN
41