Radio Function; Dab+ Operation - auna Connect Vinyl Cube Mode D'emploi

EN
34

RADIO FUNCTION

• Select [FM mode] on the main display screen with the navigation knob
or with the navigation buttons on the remote. Once selected, the FM
mode will start on 87.5 MHz.
• To save all stations with strong signal, press the navigation knob, it will
show [auto scan?] choose YES. Then it will start auto scan. Once the
auto-scan is complete, stations will be saved in your favourites.
• You will then be able to browse through these saved stations by press
the Fav button then press [<] or [>] to skip between saved stations.
• To manually scroll through FM frequency, simply press the [<] or [>]
buttons to go backwards or forwards through the frequency wave.
Pre-setting your favourite FM stations
• To save presets manually, select and listen to the station frequency
number for the station you wish to save.
• Follow by holding down the FAV button for 1-2 seconds and the number
[01] will display on the screen. Use the navigation knob to browse
through preset numbers (up to 99) and select the preset number you
wish to save it as by pressing the navigation knob.
Recalling preset FM stations
• View your favourite FM stations when you are on FM mode by simply
selecting the 'Fav' button and begin scrolling through saved stations.

DAB+ OPERATION

Select 'DAB/DAB+' on the main display screen by turning the knob and
pressing the navigation knob or with the remote navigation buttons.
On first use of the DAB on your radio, your radio will begin scanning for
DAB stations and will show' Scanning' on the display screen. It will display
how many stations have been found as the search continues.
Once all of the available stations have been found, the screen will display
the choice of available stations. Scroll through using the navigation knob or
navigation buttons to select the station you wish to listen to.
When you have selected a station, the screen will display the station and
press navigation knob to play. To choose previous or next station, use the
navigation knob to scroll accordingly.
To go back to the list to scroll through manually, select the '<' button to go