STERWINS 1200 BC-2 Mode D'emploi page 271

4.TECHNICAL SPECIFICATIONS
WARNING!
Identify safety measures to protect the operator that are based on an estimation of exposure
in the actual conditions of use (taking account of all parts of the operating cycle such as the
times when the tool is switched off and when it is running idle in addition to the trigger
time).
Depending on the actual use of the product the vibration values can differ from the declared
total! Adopt proper measures to protect yourself against vibration exposures! Take the whole
work process including times the product is running under no load or switched off into
consideration! Proper measures include among others regular maintenance and care of the
product and application tools, keeping hands warm, periodical breaks and proper planning
of work processes!
The sound intensity level for the operator may exceed 85dB(A) and ear protection measures
are necessary. EXTENSION CORDS
You should only use extension cords for outdoor use, PVC ordinary duty with a cross sectional
area not less than 1.0mm
15 meters but less than 40 meters.
EN
The vibration and noise emission value during actual use of the tool can
differ from the declared value depending on the ways in which the tool is used.
for extension cord up to 15 meters and 2.5 mm
2
270
for extension over
2