Care And Maintenance - Hartan Racer Instructions

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 24

Care and maintenance

All the materials we use can easily be cared for.
Care of the fabric parts
Clean soiled fabrics when dry using a clothes-brush or lukewarm water (then
use hair dryer). Do not rub fabrics extensively. Remove tenacious stains
using a soft detergent. All removable fabric parts may be machine washed in
lukewarm water at a gentle setting and reduced agitation, at 30 °C. Let's say
you have encountered a heavy rain shower. Dry your carriage with the hood
still on in a dry and airy room using a cloth. This prevents marking as well as
the underlining fabrics from moist soaking in through the seams. As a gua-
ranteed protection against rain, we recommend that you use our rain cover,
which is either included or can be purchased at your dealer's. Our fabrics
have quite a number of distinctive features. However, they are very sensiti-
ve to excessive sunlight. That's why you should park your carriage in the
shade whenever possible.
Care of the chassis
The chassis requires regular care. You should clean and slightly lubricate the
wheel axles at a regular 4-weeks interval. Use a silicone based lubricant
spray for all moving plastic parts to maintain them in an operative condition.
Keep all coated and chrome-plated metal parts in dry condition, and use a
finish restorer or chrome paste if necessary. Remove smaller chassis paint
damages by means of a touch-up applicator. Do not use high-pressure
cleaners when cleaning your carriage, due to risk of damaging the ball
bearings of the wheels (greased) and other functional parts (grinding
and creaking noise). Wheels: When using pneumatic wheels, make sure
they have got enough air in the tire. Specified tire inflation pressure should
WARNING!
be between 1.2 and 1.5bar max.
Max. tire pressure will be
reached quickly. Overpressure may result in accidents and personal injuries.
Replace worn plain wheel bearings and springs in time. Whenever possible,
do not park carriages using pneumatic tired wheels for a longer period of
time on light PVC or linoleum as rubber tires may rub off on the floor cover-
ing. Little stones in the thread, etc. may just as well damage the floor cover-
ing. When parking the carriage in the blazing sun or cramming it in the boot
at temperatures of above 40°C, the semi pneumatic tires may flatten or beco-
me deformed.
Tire air loss
Tires tend to lose air over time. When blowing up a flat tire, inflate it only half-
way first, and make sure the tire is evenly seated, to avoid "wobble". Then
continue to inflate it to the proper pressure.
15

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Racer sRacer xlRacer xls

Table des Matières