Unold Onyx 28016 Notice D'utilisation page 14

4. Then press twice the EIN/AUS button (on/off)
to activate the AUTO function.
5. The green control light AUTO turns on and
keeps on lighting.
6. To check the preset time, press the PROG but-
ton twice. The display shows TIMER and the
preset time. If necessary you can change the
time.
7. If not button is pressed, the display will return
to the actual settings after approx. 10 seconds
and the lighting turns out.
8. You can stop the AUTO-function at any time by
pressing the EIN/AUS button twice.
9. When reaching the preset time, the green con-
trol light turns out and the red one turns on,
brewing starts.
cLEANING
1. Unplug the coffeemaker before cleaning and
wait until it is completely cool.
2. Never immerse the appliance into water or any
other liquid.
3. Open the swing filter and take out the perma-
nent filter or the used paper filter and dispose
it.
4. If any condensation water has occurred above
the filter, just wipe it with a cloth.
5. The removable parts such as water tank, glass
carafe with lid, filter holder and permanent fil-
DEScALING
1. Regular descaling increases the lifetime and
the performance of your coffeemaker
2. If the appliance switches off before the end
of the keep-warm period of 2 hours or if water
stays in the water tank after brewing, the appli-
ance should be descaled.
3. We recommend to us a commercial descaler
according to the instructions of the respective
manufacturer.
4. Fill the water tank up to the MAX mark with the
descaler solution.
5. Optionally you can use citric acid. Use 25-50 g
per liter water.
6. Place the carafe on the warming plate.
14
All manuals and user guides at all-guides.com
10. After the end of brewing you can switch off the
11. If the appliance is not switched off, the war-
12. If the appliance is switched off earlier the
13. The preset time is kept and can be reactivated
14. If you want to change the time presetting, just
6. For easy cleaning the lid of the carafe can
7. Wipe the appliance and the warming plate with
8. Do not use strong detergents or abrasive cloths/
9. Ensure that all parts have been thoroughly
7. Press the EIN/AUS button and let about 1/3 of
8. Then switch off the appliance and leave it for at
9. Then press the EIN/AUS button again to empty
10. Pour away the descaler solution and rinse the
appliance pressing twice the button EIN/AUS
(On/OFF).
ming plate keeps warm. Two hours after begin-
ning of the brewing, the appliance will switch
off automatically.
appliance can be scaled. In this case please
follow the instructions of the chapter Cleaning
and Descaling.
by pressing the EIN/AUS button twice.
restart as described above.
ter can be cleaned in warm soapy water.
be opened by pressing the key on top of the
handle.
a damp cloth.
liquid, as this will damage the surface.
dried before using.
the solution flow through.
least 15-30 minutes. In case of strong calclim
deposits you can also leave it overnight.
the water tank.
appliance two to three times with fresh cold wa-
ter.