AEG S73130KDX3 Notice D'utilisation page 25

All manuals and user guides at all-guides.com
It is possible to change predefined
sound of buttons by pressing together
3.2 Display
A B C
H G
3.3 Switching on
1. Connect the mains plug to the power
socket.
2. If the display is off, press ON/OFF.
If DEMO appears on the display, the
appliance is in demonstration mode.
Refer to "What to do if...".
The temperature indicators show the set
default temperature.
To select a different set
temperature refer to
"Temperature regulation".
CAUTION!
If the door remains open for
some minutes, the light will
turn off automatically. The
light is reset by closing and
opening the door itself.
3.4 Switching off
1. Press ON/OFF for a few seconds.
The display switches off.
2. Disconnect the mains plug from the
power socket.
3.5 Temperature regulation
The set temperature of the fridge may be
adjusted by pressing the temperature
button.
Default temperature:
• +5°C for the fridge
The temperature indicator shows the set
temperature.
D
F E
Mode and Temperature colder button
for some seconds. Change is reversible.
A) Timer indicator
B) COOLMATIC function
C) Holiday function
D) Temperature indicator
E) Alarm indicator
F) ChildLock function
G) MinuteMinder function
H) DYNAMICAIR function
The set temperature will be
reached within 24 hours.
After a power failure the set
temperature remains stored.
3.6 MinuteMinder function
The MinuteMinder function is to be used
to set an acoustic alarm at the preferred
time, useful for example when a recipe
requires to cool down food products for
a certain length of time.
1. Press Mode until the corresponding
icon appears.
The MinuteMinder indicator flashes.
The Timer shows the set value (30
minutes) for a few seconds.
2. Press the Temperature colder or
Temperature warmer button to
change the Timer set value from 1 to
90 minutes.
3. Press OK to confirm.
The MinuteMinder indicator is shown.
The Timer starts to flash (min).
It is possible to change the time at any
time during the countdown and at the
end by pressing the Temperature colder
button and the Temperature warmer
button.
At the end of the countdown, the
MinuteMinder indicator flashes and an
audible alarm sounds. Press OK to switch
off the sound and terminate the function.
It is possible to deactivate the function at
any time during the countdown by
repeating the function steps, until the
indicator turns off.
ENGLISH 25