Removing The Vacuum Shoes - Advance ES4000 Mode D'emploi

A-16 / ENGLISH

REMOVING THE VACUUM SHOES

1 See Figure 8. Turn the Key Switch (A) OFF.
2 Disconnect the Vacuum Hose (AA) from the Vac Shoe (BB) and pull up on the gold Chain (CC). Slide the Vac Shoe (BB) out of the Shoe Support Weldment
(DD). NOTE: The procedure is the same for both vac shoes but the right side shoe must be removed before removing the left side shoe.
3 Reinstallation is reverse of removal.
FIGURE 8
A-16 - FORM NO. 56091013 - ES4000