TechniSat DIGITRADIO 52 CD Mode D'emploi page 121

9.2 Playing / pausing CDs
> Press the MODE button as often as required until [CD] is shown on the display.
> In order to insert a CD, press the CD compartment open/close button, insert
the CD with the lettering uppermost into the CD compartment and press the CD
compartment open/close button again to close the CD loading process.
Insert the CD carefully with the printed side facing upwards. Ensure that the CD is
not positioned at an angle.
When inserting / removing the CD, please hold it by the edge.
Do not start the operation until the content of the CD has been read completely,
to ensure that all the required information on the memory medium has been
read. With MP3 CDs in particular, this process can take some time.
> By pressing the Play/Pause button you can start/pause/continue the playback
(the playing time flashes on the display when paused).
Always stop the playback prior to removing the CD.
If there is no
15 minutes.
playback, the DIGITRADIO 52 CD switches to standby after approx.
DE
EN
FR
NL
121