TechniSat DIGITRADIO 52 CD Mode D'emploi page 116

8.5 Scan settings
In this menu item it is possible to set the sensitivity of the scan.
> Hold the SELECT/MENU button down again briefly. Use the < or > buttons to
select the [Scan settings] item and press the SELECT/MENU button.
> Select whether the scan should only stop for stations with a strong signal
[Strong Stations Only] or for all stations (including stations with a weak signal)
[All Stations].
With the All Stations setting, the scan stops automatically upon detecting each
available station. This can result in weak stations being played with background
noise.
8.6 Audio settings
> Hold the SELECT/MENU button down again briefly. Use the < or > buttons to
select the [Audio settings] item and press the SELECT/MENU button.
> Use < or > to select the [Stereo permitted] or [Mono only] item to play back in
stereo or only in mono sound when the FM reception is weak.
> Confirm by pressing SELECT/MENU.
116