TechniSat DIGITRADIO 52 CD Mode D'emploi page 143

15 Troubleshooting
If the device does not operate as intended, check the following table for information.
Symptom
The device cannot be switched on. The device is not being supplied with power.
No sound can be heard.
The display does not switch on.
Poor reception via DAB+/FM.
The device cannot be operated.
External device is not charging via
wireless charging
If the malfunction has not been resolved, even after performing the checks described,
please contact the Technical Hotline.
Possible cause / remedy
Connect the power supply unit correctly to the
socket and to the device.
Increase the volume.
Disconnect the device from the power supply
and then reconnect it.
Change the position of the antenna or the
DIGITRADIO 52 CD.
Disconnect the device from the power supply
and then reconnect it.
Change the position of the charging mat until the
charging process begins.
DE
EN
FR
NL
143