Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
22 electrolux
What happens if something goes wrong
If the appliance is not working correctly, check the following points before calling your local Electrolux Service
Force engineers.
Keep in mind that
If a fault should occur with your appliance, check using
these instructions to see if you can eliminate any of the
causes yourself.
Important:
Callouts by the after-sales service during the guarantee
period are not free if the appliance is working incorrectly
due to incorrect use.
A series of suggestions follow for dealing
with faults.
The oven door cannot be opened
Has the pyrolytic cleaning function been activated? The
door remains locked until the oven has cooled down
sufficiently. The door can also be unlocked at the end of
the programmed time.
The electronic system of the oven is
behaving irregularly or there is erratic
connection behaviour...
• Turn the appliance off and then back on.
• In the case of possible operating faults, disconnect
the power supply to the appliance by unscrewing the
fuses, or disconnecting the automatic differential for
several minutes. Then set the time.
Is "PYRO" shown on the display?
• The oven has become sufficiently dirty. Start pyrolytic
cleaning. See the chapter on "How to use pyrolytic
cleaning".
Is "12.00" shown on the display, or is
the TIME LED flashing?
All times set are deleted when the appliance is first
connected or if there has been a power cut.
Set the time because this is necessary for the oven to
work.
Is "SAFE" shown on the display?
The child safety device is switched on. See the chapter
"Child safety device".
22
All manuals and user guides at all-guides.com
The fuses trip repeatedly
Please contact the technical service centre or a certified
electrician.
The oven light is broken
How to replace the oven light is described in the section
"Cleaning and maintenance" - "Replacing the oven
light".
The oven is not heating up
• Has the fuse tripped in the household installation?
• Is the child safety device activated, or the automatic
on/off feature?
• Has the limitation on the oven's duration of service
been activated?
Cooking results are not satisfactory
• Have you taken into account the advice and
recommendations
chapter "Using the Oven"?
• Have you followed the details shown in the cooking
table exactly?
Is an error code Fxx shown on the
display?
The appliance is faulty. Please take note of the error
code and contact the technical service centre.
If these suggestions do not help to solve the problem,
please contact our after-sales service.
shown
in
the
Publicité
Chapitres
Table des Matières
