Haussmann AGT103-H Guide De L'utilisateur page 14

TABLE OF CONTENTS
SCHEMATIC DRAWING
PARTS LIST
IMPORTANT SAFETY INSTRUCTIONS
ADDITIONAL SAFETY INSTRUCTIONS
SPECIFICATIONS
FUNCTIONAL DESCRIPTION
ASSEMBLY
OPERATING PROCEDURES
MAINTENANCE
WARRANTY
WARNING ! Read and understand all instructions. Failure to follow all
instructions listed below may result in serious personal injury.
WARNING! When using electric tools, machines or equipment, basic safety
precautions should always be followed to reduce the risk of fire, electric shock,
and personal injury. Completely read the manual before proceeding to use this
KEEP THESE INSTRUCTIONS.
IMPORTANT SAFETY INSTRUCTIONS
ALL
READ INSTRUCTIONS BEFORE USING THIS TOOL
1. KEEP WORK AREA CLEAN. Cluttered areas invite injuries.
2. CONSIDER WORK AREA ENVIRONMENT. Don't use power tools in damp,
wet, or poorly lit locations. Don't expose your tool to rain. Keep the work area
well lit. Don't use tools in the presence of flammable gases or liquids.
3. KEEP CHILDREN AND BYSTANDERS AWAY. All children should be kept
away from the work area. Don't let them handle machines, tools or extensions
cords. Visitors can be a distraction and are difficult to protect from injury.
4. OBSERVE PROPER PRECAUTIONS REGARDING DOUBLE INSULATION.
This tool is double insulated. It is equipped with a polarized plug. One blade
is wider than the other, so it will fit into a polarized outlet only one way. If you
have difficulty inserting the plug, try reversing it. If it still doesn't fit, do not alter
the plug; have a qualified electrician install a polarized outlet.
5. PREVENT ELECTRIC SHOCKS. Prevent body contact with grounded surfaces:
pipes, radiators, ranges, and refrigerator enclosures. When your body is grounded
the risk of electric shock increases. When working wherever "live" electrical wires
may be encountered, try to ascertain whether there is a danger of shock. Even so,
DO NOT TOUCH ANY METAL PARTS OF THE TOOL while using it. Hold the tool
only by the plastic grip to prevent electric shock if you contact a live wire.
6. HANDLE THE CORD CAREFULLY. Never carry your tool by the cord or pull on
the cord to unplug it. Protect the cord from potential sources of damage: heat,
oil & solvents, sharp edges, or moving parts. Replace damaged cords immedi-
ately.
7. WHEN WORKING OUTDOORS, USE AN OUTDOOR-RATED EXTENSION
CORD. An extension cord rated for outdoor use must be marked "W-A" or "W".
8. DO NOT EXPOSE ELECTRICAL POWER TOOLS TO MOISTURE. Rain or
wet conditions can cause water to enter the tool and lead to electric shock.
9. ENSURE THE EXTENSION CORD YOU USE IS OF SUFFICIENT GAUGE
FOR ITS LENGTH.
Recommended Minimum Wire Gauge for Extension Cords
Amps from Tool Nameplate
0-5 amps
5.1-8 amps
8.1-12 amps
12.1-15 amps
15.1-20 amps
14
AGT103-H
All manuals and user guides at all-guides.com
25' (7 m) length 50 (15 m) length 75' (23 m) length 100 (30 m) length 150' (46 m) length 200' (61 m) length
16 ga. 16 ga. 16 ga.
16 ga. 16 ga. 14 ga.
14 ga. 14 ga. 16 ga.
12 ga. 12 ga. 10 ga.
10 ga. 10 ga. 10 ga.
p.12
p.13
p.14
p.16
p.17
p.17
p.17
p.20
p.21
p.22
tool.
14 ga. 12 ga. 12 ga.
12 ga. 10 ga. Do Not Use
10 ga. Do Not Use Do Not Use
10 ga. Do Not Use Do Not Use
Do Not Use Do Not Use Do Not Use
!
!