Christopeit Sport Twist'n Step Plus Notice De Montage Et D'utilisation page 14

Step 4:
Attach the handlebar (16) at upper handlebar support (9).
1. Guide the handlebar (16) through the appropriate holder of upper han-
dlebar support (9) and adjust the holder so that the holes and threats
align.
Put on each screw (13) one spring washer (12) and one washer (11) and
tighten the handlebar (16) at the upper handlebar support (9) firmly.
2. Put the pulse cable (10) through the holes at upper handlebar support
(9) into top position and attach the handlebar cover (14) onto handlebar
connection point.
Step 5:
Attach the computer (18) and computer holder (17).
1. Take the computer (1) that has been supplied out of the packaging and
insert the batteries (Type "AA"-1.5 V pencells) by watching for the right
polarity on the back of the computer (18). (Batteries for the computer
are not included in this item. Please buy them at your located market.)
2. Guide the computer holder (17) to computer (18) and put the 3 cable from
Computer (18) through the hole of computer holder (17) and push the
computer (18) onto the computer holder (17). Take care that the cables
are not squeezed.
3. Guide the computer holder (17) with computer (18) to top of the upper
handlebar support (9) and connect the plugs of upper connection cable
(8) and pulse cable (10) with computer cables. Put the computer holder
(17) with computer (18) onto the top of upper handlebar support (9) and
adjust it in a comfortable viewing way.
Step 6:
Checks
1. Check the correct installation and function of all screwed and plug con-
nections. Installation is thereby complete.
2. When everything is in order, familiarize yourself with the machine at a
low resistance setting and make your individual adjustments.
Note:
Please keep the tool set and the instructions in a safe place as these may
be required for repairs or spare parts orders becoming necessary later.
Warning:
Never touch the hydraulic cylinder during or immediately after the training,
since it can get very hot depending the amount of use.
All manuals and user guides at all-guides.com
14