Reset Procedures - Sharp PW-E260 Mode D'emploi

Reset procedure if trouble occurs
Exposure to a strong physical shock or powerful electrical fields may
render the keys inoperable, to the point that the power cannot be
switched on. If such case is suspected, try following the procedure
below.

Reset procedures

1. Press the RESET switch located on the
bottom of the unit with the tip of a ball-point
pen or similar object. Do not use an object
with a breakable or sharp tip.
The message 'Do you want to initialize?'
appears.
2. Press Y to initialize the unit.
• A message 'Initialized!' is momentarily displayed.
• If N is selected, then the unit will not be initialized.
3. Follow the instructions on the screen to select the display language
and adjust the LCD contrast, as well as to set the key sound on/off
configuration (see steps 7 through 9 of the procedure on page 6.)
Note:
• The reset procedure will clear the History list and Calculator's
memory, as well as to reset the Currency converter and the
Set-up menu configurations. To avoid these, you may press N
at step 2 of the above.
• After the N key is pressed as in the case above, or even when the
o key is pressed, the reset procedure may automatically be
initiated due to corrupted data. When this occurs, the message
'Initialized!' will be displayed, followed by the display language
selection screen. Follow the instructions on the screen, as well as
to adjust the LCD contrast and set the key sound on/off configura-
tion.
56
All manuals and user guides at all-guides.com
N N N
N