Sharp PW-E260 Mode D'emploi page 9

All manuals and user guides at all-guides.com
Turning the power on/off
The power can be switched on by pressing the keys listed below.
To turn off the power, press o.
Key
o
Restores the display as it was before the unit was
switched off (Resume function).
m
The main menu screen appears.
d
The menu/initial screen of each dictionary and/or
t
function appears (Direct-on function).
g
s
j
a
Auto power off function
To save the battery, the PW-E260 will automatically turn its power off if
no key operations are detected for a set period of time. The initial
activation interval setting is 5 minutes, but it can be adjusted by
following the directions on page 21.
To attach a commercially available strap
A carrying strap can be attached, as shown in the picture below (strap
not included).
Caution:
• Do not swing the unit by the strap, or
use excessive force to pull the strap.
Doing so will cause a malfunction or
hardware damage to the unit.
Display status upon start-up
Back of the unit
7